You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2110 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Monday, August 13th 2012, 12:36pm

by Wet_Boots

As long as a system has a single mainline, with a 24VAC signal controlling water flow into the mainline, it isn't any great hardship to add a single switch to toggle between water sources.

Monday, August 13th 2012, 8:08am

by GatorGuy

First, listen to Boots.

What you want can be done but seems like a lot of digging and piping.
Fairly easy if you are going to manually switch between the sources, bit complicated if you want automatic switching.
Put in your RPZ, add a ball valve on the main line, T in your lake source after that ball valve, have a ball valve on the lake source, have fun.

Sunday, August 12th 2012, 1:59pm

by Wet_Boots

The very first thing you do is to re-plumb the existing city-water connection, so that it will have an RPZ backflow preventer. That is mandatory.

Sunday, August 12th 2012, 1:00pm

by cmichael26

Valve and pipe design for mulitiple water sources

I have three exsisting zones run off of city water in the front of my house. I want to add three zones to my back yard but I also want to pump water out of a lake in back. I need to tie all the zones together so that I could use either water sourse for the whole system. Im not sure how to design the valves and backflo's to be able to select either sourse. Any suggestions or help would be appreciated.