You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, August 6th 2012, 9:00am

by GatorGuy

I don't know that you could bypass it without hard wiring the pump to an on/off switch.

Saturday, August 4th 2012, 1:21pm

by Wet_Boots

use your multimeter to check out the situation - be careful of high voltage

Saturday, August 4th 2012, 12:22pm

by john1979

pump start relay

Hello, my sprinkler pump will not turn on... timer shows as on....does count down, fuse was checked and is good...i suspect the pump relay, although it was replaced approx 18 months ago .... but i have had things go bad quicker.... i was wondering how i can by pass it ...temporarily of course...to make sure this is the problem...last time it was the only logical guess.. this time i am not so sure.... thanx !