You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2541 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, September 13th 2007, 2:09pm

by gregory1420

i would ask the county about that and see if they have any codes on it before i did something

Sunday, September 9th 2007, 3:02pm

by HooKooDooKu

I'd say the question is a bit vauge.

While my knowledge is limited to what I've seen in irrigation and plumbing forums, I don't think I've ever seen any code related issues saying where you have to put check valves, especially since the main location I've seen check valve being located (in relation to irrigation) is in latteral lines so that the water left in the lateral lines doesn't flow backwards and out of the lowest head (for example, I'm seen check valve that are ment to be installed at the inlet of the sprayhead, effectivenly sealing all the water in the latterals because there's no where for air to get back into the system to allow the water to flow out.

So the only general answer I can say is to make sure the placement of what ever check valve you are talking about is located in such that you can blow all the water out of the pipes at the end of the year when you winterize. Of course the other thing is that that port (input) you use to blow out the system has to (based on plumbing codes) must be located AFTER a backflow preventer that seperates domestic water supply from irrigation supply (and a single check valve is NOT a backflow preventer... not in a plumbing code scence).

Saturday, September 8th 2007, 3:02am

by dsc

check valve location

Is ok to put a check valve outside the house? I live in the midwest with cold winters.