You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2153 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, August 1st 2012, 7:37pm

by Wet_Boots

just get an adapter for the testcock connection on the backflow preventer

Wednesday, August 1st 2012, 3:04pm

by mikemd

blow out port for compressor

I am in the process of fixing things that were done wrong by a local irrigation installer. They installed a dual backflow

preverter in the line which is code in my area. The problem is there is nowhere to hook a compressor to so I can blow out the lines for winterization. What would be my best option for adding this? Is there a fitting I can install that I can connnect a quick coupler so the lines can be blown out? Thanks