You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 817 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Saturday, July 28th 2012, 1:23pm

by mrfixit

What happens when you move the number 4 wire? Does it come on? If it does I suspect the 1-2-3 module is bad. If it doesn't again you have two problems. Either the number 4 valve needs work or the number 4 wiring is bad and the module is messed up.
I'd try the module before buying a new controller simply because of the price difference. 12 station controllers aren't cheap. You can always return the new module.

Saturday, July 28th 2012, 12:39pm

by Wet_Boots

If you have performed a by-the-book controller reset, then you are looking to replace the controller faceplate and/or defective modules.

Saturday, July 28th 2012, 11:10am

by hamiltos777

Oops, I was wrong about a few things in my earlier post...I was tlking to my son over the phone and I think he misunderstood some of my questions.
As I said, I have a hunter system with a Hunter PRO C control panel. The panel has 12 zones, tho only 10 are being used. (zones 2 and 10 are empty)

When the panel is plugged in, zone one is always on. zones 3 and 4 will not operate from the panel (manually or as part of a program) unless I open the solinoid by hand at the zone. zones 5-9 & 11&12 work fine. When they run, zone one is still on, tho there is obviously a slight drop in the pressure.

Yesterday, I had said that zone one was still on when it was not plugged in, indicating debris in the valve. This is not the case. Zone one turns off when the panel is unplugged, which indicates it isn't the valve, but an electical problem or a panel problem.

This morning I unplugged the panel and switched the zone 1 and zone 3 wires at the panel. the problem reversed itself (the former zone 1 sprinklers turned off and the former zone 3 sprinklers tuned on.) So it seems Zone 1 is always on. As I said, zone 2 on the panel isn't used, so I put the zone 3 wire into the zone 2 termnal, just to see what would happen. The Zone 3 sprinklers came on. So it seems Zones one and two are sending current as long as the panel is plugged in and Zones 3 and 4 are dead.

I removed the panel to reset it and on a whim, plugged in the box that houses the panel and wiring. Zone one came on. So, it doesn't seem to be the panel. Is it the modules? I'm sort of at a loss right now.

Friday, July 27th 2012, 11:56am

by hamiltos777

I do not believe I turned the zone on manually and didn't notice that morning when I left for work in the morning if it was still on. When I got home and started investigating is when I saw that the other zones wouldn't operate from the control panel, though I know they had in the recent past. I am assuming that these problems are related due to the timing, but it could just be a coincidence.

I'm unsure if the other zones come on during the normal schedule, but when I run them manually with the control panel they will not run so I am assuming they are not. Only way they run is to manually go to the box and open the solenoid. For now, I'm shutting off the valve that runs into the sprinkler system so it doesn't run constantly. when I need it to run, I just turn it on and open the solenoids for the other zones one at a time for 30 min.

So it seems like it just isn't closing on it's own. I'll tackle that this weekend and see what happens next with the other zones (as far as operating at the normally scheduled time...) Fortunately, there is a home depot reasonable closeby that carries hunter parts if it isn't just debris. Additionally, I'll be attempting to label the pumps individually so this will be a touch easier in the future. any recommendations for that?

Thank you both very much for your help! I'll let you know how it goes.

-Scott

Friday, July 27th 2012, 11:26am

by GatorGuy

Normally a zone not turning off means a valve is stuck open.
Sometimes valve failure, sometimes just debris in the system.
If it's just debris you can open and clean easily.

Friday, July 27th 2012, 11:25am

by mrfixit

You've described two seperate problems. There's something wrong with the valve so it needs replaced or repaired in order to shut off.
Did you turn that valve on manually somehow?
--
Second, there's either a wiring problem or something wrong with the controller.
You said the valves wont come on manually, do they come on at the scheduled time?

Friday, July 27th 2012, 8:11am

by hamiltos777

10 Zone Hunter System - 1 Zone on constantly

Good Morning- totally new to these forums, so If I am using the wrong terminology, please forgive me. I am just learning.

I recently bought a home with a 3 year old Hunter System. It has worked fine until earlier this week when I got home from work and saw that one of the Zones was on. I inspected the control panel and it was set to run the program, but the program is set to go very early in the morning, so there wasn't one running at the time and the display gave no indication that it was running the zone. I switched the system to off and it still runs.

When I manually set other zones to run on the same box, they will not operate. I unplugged the control panel and it still runs. The only way I can get the 3 other zones to operate is to go to the box and manually open the solenoid.

Any suggestions? Thanks in advance for any help.
-Scott