You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2162 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, July 23rd 2012, 9:22am

by GatorGuy

Was working and just stopped?
New install and it never worked?

Their manual is a little less than helpful.
I couldn't find the symbol you mentioned.
The only advice they give for your problem is
1. Transformer defective or not connected.
2. Programming is incorrect.
3. Fuse has been blown.

Best bet might be their tech support: 1-800-488-6156.
If you find out anything we'd appreciate a follow up. Add it to our list of solutions found.

Sunday, July 22nd 2012, 5:21pm

by Gazdad69

Sprinkler will not turn on

I have a Orbit 57696 model and not 1 of the 6 zones will come on. On the control box it has power off inside a little water drop in upper left corner of display. I tried to manually start it and no zones will work. It is wired to the outside electrical box. Fuse was not blown and I replaced it same results. Any help would be appreciated.