You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 820 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, July 22nd 2012, 11:05am

by mrfixit

How do you turn the valve off once it's stuck open?

Sunday, July 22nd 2012, 10:44am

by Wet_Boots

the controller probably has nothing to do with a valve getting stuck open, which is almost always a mechanical issue within the valve

the Imperial Valet wiring harness is completely labeled as to which conductor is which - the color code follows that of the labeling of electrical components, up to a point (BBROYGBVGW) except black is Master Valve and white is Common

Sunday, July 22nd 2012, 9:20am

by new user brennam (Guest)

Imperial valet sprinkler timer wiring - Need Help!

I purchased a home with a imperial valet sprinkler system. The Timer in the basement is wired up, but I think it is not correct. All zones function properly and the system will turn on, but will not shut the water off when the alloted time has elapsed.
The terminal block starts with a LINE 1,2,3,4,5,6,7,8,9,0,10,11,C,M.V
I saw wires hooked up to everything except m.v
there was a red wire hooked to C
If anyone knows the correct wire harness color code and configuration, it would be greatly appreciated. I will look for responces to this thread, but you may send immediate help to my email address below. Thanks for any assistance you may be able to provide.
SSgt, Michael Brenna, USAF
victory4jesus@hotmail.com