You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2159 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Saturday, July 21st 2012, 9:17pm

by Wet_Boots

It may need a replacement - if you are going to work on your own system, you need a replacement head and the special wrench it takes

Saturday, July 21st 2012, 8:03pm

by ERS_Kicks (Guest)

The arm's clean from what I can tell. I spent a good deal of time making sure. There's a lot of sediment at the bottom, is that normal?
Thanks for the reply, BTW.

Saturday, July 21st 2012, 8:22am

by Wet_Boots

it might need something cleaned out of the impact arm

Saturday, July 21st 2012, 7:31am

by ERS_Kicks (Guest)

Rainbird Impact Sprinkler flooding and not re-impacting

I have several Rainbird Maxi Paws. All of them are working fine except for one who suddenly began malfunctioning.

When the hammer hits the stream, it won't bounce back so the water just gurgles everywhere. The basin is also flooded.
The rainbird troubleshooting guide said it might be poor drainage.

Any thoughts would be great! Thanks!