You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 881 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, July 20th 2012, 8:21am

by GatorGuy

I don't even have to look at your system to know that's too many.
Even if you use just 12' half circle sprays you are using around 23gpm. (18 x 1.3gpm)
Any full circles would be worse.
Your average residential water supply won't handle that.

You need to find your available gallons per minute. That will tell you how many heads you can run.
Check out design page 2 for figuring gpm.
Then look at figuring zones to figure out heads.

Let us know what you find out.
We'll be glad to help.

Thursday, July 19th 2012, 11:13pm

by katgill

How many sprinklers can you hook up to one valve without losing pressure?

I hooked up 18 sprinklers to 1 valve and lost pressure? :( What do I do? I have 3 valves in the front. First valve has only 1 huge sprinkler and medium size sprinkler hooked up to it. The second valve has 18 valves hooked to it :( and I lost pressure :( (These valves were the small valves though - 18 of them and I thought it would be okay)???