You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2316 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, July 18th 2012, 8:26am

by GatorGuy

Weeping from the ell...
You have the head off, look down at the 90 and see water seeping.
From top (open) end or from glued joint?
Constant or just seepage of water remaining in system after valve turned off?
When you remove a head you should expect some water to be in the pipe.

Tuesday, July 17th 2012, 8:27pm

by Brewerofales

Leaking hunter pgp

Have 3 heads on 1 zone. 1pgp rotor leaks from the top of the head(cap). The other 2 do not leak.Unscrewed the entire rotor, case and all down to the 90deg ell. Found water to be weeping from the ell, is this normal or is there a problem with the valve? like I said at the beginning, the other two rotors do not leak.Should I just replace the entire pgp rotor or is it a valve problem also.

Constant flow of water.I did pick up a new diaphragm at the local sprinkler supply co.They think it is a bad diaphragm. new valves were installed 3 months ago!