You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1005 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, July 16th 2012, 8:01pm

by motivated1

doesnt sound like a sensor problem...

sounds like a continuity problem. Have you checked resistance? Have you checked resistance between the valves at the controller? have you checked output from the controller? Before you pick up a shovel, pick up a meter bro/ sis w/e.

Monday, July 16th 2012, 8:08am

by GatorGuy

bad controller. check output at terminal.
bad wiring to valve. check output to valves
bad solenoid. Try swapping solenoids.
Can't find valve? Valve locator.

If you are brand new and some of this doesn't make sense, look at TROUBLE SHOOTING.
It'll give you a good start.

Sunday, July 15th 2012, 9:53am

by lawn6

sensor problem

I am completely new at this. One zone fails to come on for automatic operation.
What's the location of the sensor? How can this be corrected?