You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 642 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, July 15th 2012, 7:17pm

by Wet_Boots

Replace it with an Irritrol solenoid

Sunday, July 15th 2012, 7:10pm

by daleth67 (Guest)

Buzzing valves; erratic control at timer box

Here's the deal...whenever I turn the sprinkled system on either manually or electronically one of my control valves has a loud "hum" the entire time its running. The additional issues are that the timer box doesn't shut this zone of automatically which requires me to be around whenever the system is running and to subsequently shut the water off completely (after water main) in order to eliminate "hum". I am fairly new to the irrigation game and this irrigation system had been installed 10 yrs prior to my family moving into the house. That said...the valvesnare made by Nelson (no idea which series) and the solenoid has the following info stamped on it: 24 VAC 50/60 Hrz Inrush .50 amp. Holding .23 amp. Any assistance would be greatly appreciated! Thanks in advance