You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2164 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Sunday, July 15th 2012, 6:53am

by wsommariva

Head to head coverage is most important.

Saturday, July 14th 2012, 7:45pm

by marc9954

Thanks for the advice. The whole installation looks relatively easy. I just want to make sure I set up enough heads and zones to cover the right areas with the right size pipe

Thursday, July 12th 2012, 9:26am

by GatorGuy

The design part can look intimidating but it's not.
It's a step by step procedure.
The Hunter handbook is excellent. Available on Hunter's site.

Also, look at System Design for overall advice and descriptions.
Then click on the Step by Step selection for a start to finish guide.

The pipe choice depends on area. If you ground freezes, poly tubing as wsommariva suggests.
If not, PVC might be best and cheaper.

Thursday, July 12th 2012, 8:15am

by wsommariva

I installed two systems. I recommend Hunter products as well as the Hunter residential sprinkler system design handbook. Start with the manual.

You need to learn the basics such as psi and gpm.

Use 1 inch valves and 1 inch poly tubing. You have many options for heads.

Don't be intimidated, you have this site for help.

Start with the manual, it will give you design tips.

Wednesday, July 11th 2012, 8:43pm

by marc9954

new sprinkler system install recommendations

Good evening everyone,

I am looking into installing a underground sprinkler system myself. My yard is 40x40 square that I will sprinkle and I am on city water. I have never installed one before and I am looking for honest professional advise. I am mechanically inclined and can do it all myself, I just need advise on design and what type of system to use. I am looking for something dependable. Any information would be greatly appreciated.

1. How many heads/ zones would I need?
2. What type of heads are recommended?
3. What pipe size should I use for each zone?
4. Where is the best placement for each head?

Thanks to all for the help.