You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 776 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Wednesday, July 11th 2012, 8:47am

by kevreh

Oh I meant regular off the shelf pvc from the big box stores. But it looks like the Kwik Slip adapters work with both types of PVC.

Being in Northern VA vib. trenchers are commonly used and preferred due to less mess/damage to existing grass. Of the professional installers I talked to its a pretty even split between using pvc and poly. Either way you have to winterize the lines.

Tuesday, July 10th 2012, 4:59pm

by GatorGuy

Trenching depends on soil, for one thing. Vibratory trenchers are used in areas with workable soil.
I'm in Houston Tx and we have lovely dark, hard, sticky clay. It laughs at vibratory trenchers.

Pipe selection depends on region also. Hard freeze areas (Wisconsin, New York) use flex pipe. The ground temperatures there would make pvc brittle and it would break with any ground shift.

Here we use PVC. It's cheap. Ground freezing is a concept totally alien to us.

I don't have experience with snap/tap situations. I've been told by others on this forum that you use barbed 'T's for your installation and that saddle taps are for retrofit and repair.

What 'non-200' pvc are you referring to?

Tuesday, July 10th 2012, 4:45pm

by kevreh

So, whats the most common method of connecting sprinkler heads to pvc pipe. Or let me back up, when using pvc, do most installers use a trencher (so the trench is open and you can easily move the pipe around) or a vibratory trencher (which, based on what your saying, would be harder to tap into). Seems like the vib. trencher makes more sense for the poly pipe.

In terms of tapping into the pipe these seem the way to go for poly: http://www.sprinklerwarehouse.com/Snap-Tap-Saddles-Poly-s/4913.htm

And for non-200 pvc seems like you would do a 't' off the pipe then use barbs and adapters to the sprinkler head. Or use these: http://www.sprinklerwarehouse.com/KwikSlip-PVC-to-Swing-Funny-Pipe-Y-s/196.htm


????

Tuesday, July 10th 2012, 3:11pm

by GatorGuy

It starts with a shovel and lots of digging.
If your pipe is flexible enough, and the soil gives enough, and you dig back far enough each way, you can cut out a small section and with great effort flex the pipe into the tee.
If not you can use something like Pipe Fix or Kwik Repair.
Like many things in this industry, it starts and ends with the shovel.

Tuesday, July 10th 2012, 1:44pm

by kevreh

I'm still learning so I apologize if this has been addressed before. If pvc is installed using a vibratory trencher, then the pipe is in place with earth on top of it. How would it be possible to cut the pvc, spread the pipe a couple inches to make room for the 't' since the pipe is in the ground???

Tuesday, May 29th 2012, 6:21pm

by teamo

I would not use a snap tee. Dig out a large enough area to work with and do it right with a regular tee. You'll never regret doing it right the first time.

Thursday, April 26th 2012, 3:25pm

by GatorGuy

Never, ever ignore a gut feeling.

Thursday, April 26th 2012, 1:13pm

by MrGrumpy

Gator,

I don't know if i want to be the guinea pig or not, I'm still debating on what to do. My gut is telling me to use a regular tee fitting.

Thx

Monday, April 23rd 2012, 8:41am

by GatorGuy

MrGrumpy,
Since we sell them I should tell you they work perfectly.
Truth is, don't know. We do sell plenty but I've never found someone who has used one.
I've done it here but that's at a desk/controlled conditions.
Solid as it can be though.

Looking for you to be our first report!

Friday, April 20th 2012, 9:26pm

by MrGrumpy

I meant to say extend a zone versus add a new one. Sorry!