You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4706 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, January 1st 2002, 12:01pm

by SprinklerWarehouse Irriga

Yes you should put a filter in the mainline after the pump but before the master valve or backflow prevention device. If you do not have a backflow prevention device or a master valve, you should put the filter before the mainline splits off to feed a zone valve (section valve). Furthermore, install on suction or discharge side of system. We suggest installing between the pump discharge and the reservoir tank if you are using a tank. Install on the discharge side to allow use of a purge valve for easy one step cleaning. Manifold two or more filters for applications with flow rates higher than 100 GPM.

The filter will help keep the valve screens, which are usually located in a valve on the diaphram, from clogging. It will also help keep debris from the lake from preventing the diaphram from sealing or completely closing and help keep nozzles and nozzle filters from clogging.

The type of filter to use is the Vu-Flow T Style Screen Filter. To see the filter and read more about how to corectly size the filter and screen mesh selection click on the following link and then click on the picture of the Vu-Flow filters:
http://www.sprinklerwarehouse.com/shop3/MiscMisc.html
<img src=icon_smile.gif border=0 align=middle>


Monday, December 31st 2001, 6:08am

by RVLI

Filter For Control valve

Should I put in a filter before my control valves if im using lake water. If so, how big or small of a filter should I get for it?