You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1101 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, January 10th 2016, 8:43am

by Capitalsprinkler

mud inside pipe=leak

Monday, July 9th 2012, 10:09am

by GatorGuy

Three zones lost pressure?
Why replace one valve?
What happened on the other 2 zones?
Sounds like a leak.

Sunday, July 8th 2012, 7:12am


12 Zones, 4 Control Valves, one zone not working

The system was installed about 10 years ago, it is on an Orbit Control Panel. I replaced a control valve about 6 weeks ago when 3 zones had lost pressure. I pulled the top of a head and there was muddy water in the head. I turned the zone and could not find a leak in any of the zone head points. There is how ever water standing in the control valve box. any thoughts