You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2174 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Monday, July 9th 2012, 8:09am

by GatorGuy

Saturday, July 7th 2012, 8:33pm

by Central Irrigation

Either way you have to dig up the head to raise it or to add an extention. They make a pvc riser extension 3/4" MPT X 3/4" FPT that work well for rotors. 1/2" MPT X 1/2" FPT work well for sprays. Verify the size first.

Saturday, July 7th 2012, 6:04pm

by wsommariva

What model? And what do you mean by not having a good spray over the grass?

If you have 4 inch pop ups you can switch to 6 or 12 inch pop ups maybe depending on what you have.

Saturday, July 7th 2012, 2:36pm

by jneal

Hunter Sprinkler Not Long Enough

My Hunter sprinkler heads don't pop up high enought to get a good spray over the grass. Is there a way to add an extention or do I have to dig them up and raise the entire head?