You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2559 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Friday, June 22nd 2012, 10:03am

by Wet_Boots

install another head next to the sidewalk in between the existing ones

Thursday, June 21st 2012, 8:21am

by wsommariva

I think it's obvious that the mid range does not get water. Look at Hunter MP rotators. I have them. Each stream is at a different angle. May work for you as long as the inches per hour is similar to other heads in the zone.

Thursday, June 21st 2012, 1:18am

by ian

But I said I dumped the cans into the same sized beaker ?( Even shook out the little drips.
Anyway, I've raised the sprinkler heads and watered the lawn for the first time today with them raised, soooo shall see how it goes!

Monday, June 18th 2012, 8:32am

by GatorGuy

I'm afraid wsommariva is right. You need identical sized cans to work. Same open area, same size side walls.
Any guesses we made right now would be just that: guesses.

One other thought for you: grass is very hardy and will fight to the last minute to survive. What you are seeing today could be the result of something that happened much earlier. It might be worth your while to get in touch with either a really good nursery or your county extension agent.
Don't ever underestimate the help you can get from your county agent. They tend to know their business and their advice is free.

Sunday, June 17th 2012, 1:42pm

by wsommariva

I think you need all containers to be the same exact size if you measure as you did. Know someone with a cat? Get the food cans.

Saturday, June 16th 2012, 9:21pm

by ian

Ok so I did the can test, I ran the zone for 30 minutes with different sized containers, but dumped them into a ML beaker. The results were pretty un even, Right by the head got 150ML (was most likely too close, I noticed someone had moved it closer to the head??) while in the mid areas it got mostly 20-25 ML, a couple 10's, a 50 and a 60 which were a bit out.
My family thought they would help and bring me in the tins so they got a little mixed up, lol

These green spots around the heads are on both zone 2 and 3.

I have 5 PGP's on zone 2, and 4 PGP's and 2 Nelson impulses on zone 3.
Zone 1,4,5 are side & back yards and are green as normal
I should point out that I'm totally new to underground sprinkling - my grandmother the previous house owner is visiting and thinks that the heads are way too low in the ground when they are off?
Also the system does appear to be head to head. I've drawn myself a map of the heads I will make a picture of it or something.
And to answer a previous question about the zones being combined, apparently it was something electrical with the wires undergound.

Friday, June 15th 2012, 6:17pm

by wsommariva

Dry spots around 3 heads. All one zone? Maybe the valve has a problem. Check for leaks at the valve; maybe take valve guts out and flush real well.

Do these 3 heads seem to be watering less than other pgps?

Friday, June 15th 2012, 10:34am

by ian

Thanks everyone for the help!
I am still a bit confused as to why I've never seen these dry spots before though - It's not even the dead of summer yet and the lawn has never had these spots by the heads like there is now!
Ah well, will do the can test tomorrow =)

Friday, June 15th 2012, 8:40am

by GatorGuy

For more than you want to know:

Step by step, details and analysis of your audit.
You'll have to cut and paste. The link probably won't work.

Thursday, June 14th 2012, 7:27pm

by ian

hey, thanks for the fast replies and help, i will most definatley try the can test!
it's not downhill at all, in response to why the zones were combined i am not sure, but it was a few years back and the lawn has always looked great even after the combining. my grand mother thought the heads seemed to be misting more then usual as well which led me to googling some things.. could it be a bad pressure regulator?

i will give the can test a whirl this weekend and let you all know the results!
thanks, ian