You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2198 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, June 14th 2012, 8:25am

by GatorGuy

If you get the same model you don't have to dig.
Remove guts from old one, replace with new.

Wednesday, June 13th 2012, 8:35pm

by Wet_Boots

Buy a new head - get the same one, makes the changeover easier

Wednesday, June 13th 2012, 8:25pm

by Schneids16 (Guest)

Toro Super 800 - Unable to adjust arc - continuous clockwise rotation

The entire system is Toro. There is 1 head (Super800 series) where i need a 180 degree arc, but this head insists on continually going in a circle. I've tried some simple troubleshooting and am guessing something with the gear system has worn out and no longer works. I can continuously spin the top part of the sprinkler unit by hand in a clockwise circle. Using a screwdriver trying to adjust the arc, it seems like at a point something slips (gear?) when adjusting from 90->180->270->360. I've tried various arc positions but none seem to effect it. I am not even close to an expert on the matter so i am asking for any advice on figuring out why is doesn't work and if it can be repaired.

So...questions I'm looking for an answer to on this:
1. Is it worth it to try and troubleshoot/fix or should I just go buy a new head, start digging and replace?
2. If you recommend replacing, is it best to go with the same brand/model, or same brand but newer model? Basically, tell me what to go buy at Home Depot or the local Toro shop.