You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 834 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Monday, June 11th 2012, 8:38am

by GatorGuy

Gotta go with boots. Everything sounds like a fried circuit board.
Burnt boards can do anything or nothing. I've had them show the first 3 or 4 zones and none of the rest.
Another looked like it worked perfectly when the knob was in position but the memory was dead. Lost everything when I turned by know to the next station. So it took my settings but didn't store them.

Might be time for a new controller.

Saturday, June 9th 2012, 7:32am

by Wet_Boots

I don't know - most damaged controllers won't even show me a display of any sort.

Friday, June 8th 2012, 4:57pm

by alabama8100

There were some storms the other day, but if the clock is bad, how does that explain the fact that I can't even turn the dial to MANUAL ONE STATION or MANUAL ALL STATIONS and it stays off and display reads OFF? Does the clock have anything to do with that?

Friday, June 8th 2012, 3:46pm

by Wet_Boots

Sounds like the clock may be toast. Have there been recent lightning storms in your neighborhood?

Friday, June 8th 2012, 3:17pm

by alabama8100

Yeah, no worky. Tried the "twitchy hand" method to maybe find a short, but to no avial. Also the complete reboot did not work either. I did what the owner's manual suggested and once it returned to 1200 am status, I could not change the date or time. And again no other dial position switches work except for the same I mentioned above.
Any other ideas?

Friday, June 8th 2012, 2:31pm

by Wet_Boots

You might have an intermittent problem with the rotary dial, and may need to use a "twitchy hand" when you change dial positions

Also, there is the complete reboot you can perform, by way of the instructions in your owners manual

Friday, June 8th 2012, 1:35pm

by alabama8100

Hunter XC Controller not working correctly

I have a Hunter XC Controller that is not working. I turn it to the RUN position and the display reads OFF. The only positions on the dial it will pick up are START TIMES, SEASONAL ADJUSTMENT %, and OFF (and by picking up, I mean they will only show on the display and they are the only ones I can change with the arrow buttons). When put the dial in the CURRENT TIME/DAY position and reset the controller, it shows 12:00am on the display; however, when I try to change the time, nothing happens. It still reads 12:00 am. Any advice will be much appreciated.