You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 834 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Tuesday, June 5th 2012, 9:40am

by Wet_Boots

As long as they aren't set too deep, Maxipaw heads have done fine for me. The most common problem I see is a bit of floating debris getting caught in the impact arm recesses.

Monday, June 4th 2012, 7:26pm

by mrfixit

I've been frustrated with the Maxi-Paw for a few years now. I install a new head and a year later or less it stops rotating. I'd say about 10% of them do it. Nothing I've done has cured the problem. I just swap out the guts. Many times I don't even charge the people.

Monday, June 4th 2012, 10:10am

by GatorGuy

Easy to do if you have a Maxi Paw wrench

Monday, June 4th 2012, 9:07am

by JP (Guest)

Maxi Paws

Yes the cases are free of debris and mud. It just struck me as unusual that so many of my heads are non functioning. Could I pull the rotor out with a wrench and clean. Some of the rotors turn freely and others are stuck. Any assistance would be appreciated. I am trying to avoid replacement. The heads are only 3 years old, we are talking about 9 heads.
Thanks

Monday, June 4th 2012, 5:49am

by Wet_Boots

are the cases free of debris?

Sunday, June 3rd 2012, 8:24pm

by JP (Guest)

Maxi Paw Rotor

About 1/2 of my maxi paws will not rotate after I first turned them on this year. Plenty of pressure and impulse working, the rotor is not turning. Is there anything that can be done without the necessity of changing the head or rotor.