You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 841 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Monday, June 4th 2012, 10:22am

by GatorGuy

yes, loosening the solenoid releases enough pressure for the valve to activate.

Monday, June 4th 2012, 10:19am

by harrisc43

irrotrol 2400 levers

So - if the lever is in the OFF position, the valve will be commanded by the timer? And when it is in the ON position. it will manually open its distribution line?
It seems like all the lever does is unscrew the servo by about a 1/4 turn - is that the idea that the servo unscrews and the space allows the valve to open under spring pressure?
Again, that you all for the assistance!

Monday, June 4th 2012, 8:23am

by GatorGuy

Those are just directional indicators for on/off.

Monday, June 4th 2012, 5:48am

by Wet_Boots

those are manual operators - they do what the bleed screw does, but without releasing any water

Sunday, June 3rd 2012, 8:34pm

by harrisc43

irritrol 2400 trigger lever purpose

First I gotta say what a find Sprinkler Warehouse is! I ordered a bunch of Irritrol valves and they were being handed to me by Fedex practically before I logged off the website! I'm (of course) new to this stuff and I can't find out what are the little trigger levers that indicate off/on next to the solenoid of irritrol 2400 valves?? I haven't installed them yet and I want to be sure I have these set correctly before I plug them in. Thanks for humoring a novice!