You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2222 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The first post

Thursday, May 24th 2012, 10:26am

by GatorGuy

Get mulitimeter .
Turn on zone one.
If all the other zones come on, test voltage on other terminals.
If they also show 24 volts, turn system off, disconnect any other zone.
Turn zone one on again. Check voltage at terminal of disconnected zone. If still 24 volts controller is shot.
If not, check voltage at the wire you just disconnected.
Had a case last week were wires shorted across, voltage from any zone went to all other zones.