You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2399 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Monday, May 21st 2012, 7:02am

by Wet_Boots

Yes, tun off the supply to the sprinkler system before servicing any valves.

Sunday, May 20th 2012, 8:54pm

by stktrader

Do I need to turn off the water at the street and drain the lines before working on the valve parts?

Sunday, May 20th 2012, 8:39pm

by stktrader

Thanks. I assume it is the solenoid. My system is 10 years old.

Sunday, May 20th 2012, 7:49pm

by Wet_Boots

replace the solenoid, or fix the wiring short

Sunday, May 20th 2012, 5:55pm

by stktrader

Hunter ICC error

One of my valves gets an error message and so the system skips to the next station. I can water that station manually by turning on the solenoid. What do I need to do to fix this? tia