You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 801 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, May 20th 2012, 12:24pm

by Wet_Boots

If you can't run more wires, then you have to use a coder/decoder arrangement with the one wire

Saturday, May 19th 2012, 6:20pm

by edwildesr

How to add more valves when only two wires available?

I need to add some more valves in an area that has only one spare conductor. Is a decoder the answer and will it work with any controller if there is a decoder unit at the start of the wire segment and at the valve end? There are plenty of zones left on the controller (an Irrigation Caddy). What product should I get? Thanks!