You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 944 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, May 21st 2012, 9:13am

by GatorGuy

use a mulitmeter to check for 24v at the controller when the zone is supposed to be running.

Saturday, May 19th 2012, 11:46am

by mrfixit

Hi Dan, Either the valves aren't getting an electrical signal or the water supply is shut off somehow.

There could be a broken ground wire. The ground wire is usually white. Go out to the valves and look around. Check at the controller also. Do any digging recently?

While you're at the valves try turning one on manually via the bleeder screw or by turning the solenoid. Some valves have a tiny switch on the back of them. Is there water? If not find the shut off valve and turn it back on.

Maybe the flow controls are all shut off? I had two jobs in a row just yesterday where half the valves had the flow controls shut off.

Saturday, May 19th 2012, 11:42am

by mrfixit

Emailed Question

I am having a problem even getting my system to come on. I've replaced the battery, the digital read out appears to registered and working correctly, the schedule set up went smoothly, but when the scheduled start time occurs, there is no action. I tried to hit the manual button and nothing as well?

Any suggestions would be greatly appreciated. If not, any ideas on locating a reputable irrigation repair person? I'm located in Scottsdale, AZ

Many thanks, Dan.