You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2222 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, May 16th 2012, 8:06pm

by Wet_Boots

Unless that well delivers mucho water, a drop pipe will drop the level to a point (about 20 feet) where the pump will stop lifting the water.

You need to test the well for capacity before you proceed further, unless you want to go straight to the surest configuration at the highest installed cost.

Wednesday, May 16th 2012, 3:28pm

by brokensprinkler

Well Drop Pipe

I am in the process of installing an irrigation system. I am trying to find out how deep does the drop pipe with the foot valve need to be? Well is 2 inch and water level is 18 ft below surface. Does length matter? Well is 40 ft deep.