You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 374 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Wednesday, May 16th 2012, 12:03pm

by mrfixit

There's obviously something wrong with the valve. Normally what you've described is the diaphragm. I'm not so sure in this case because the valve is only 6 months old.
I would take the bonnet off and look for debris stuck in one of the ports. Take the solenoid off and remove the white plastic retainer thing and throw it away. It's the thing holding the solenoid plunger in place.
Reassemble and see what happens.

Wednesday, May 16th 2012, 11:08am

by Gerryw (Guest)

Sprinklers not popping up

[img]http://ts1.mm.bing.net/images/thumbnail.aspx?q=5057320251623364&id=bfe7bfe24cc621c0f02e891caca286d2[/img]It's this one #54000 3/4" anti-siphon valve.

Wednesday, May 16th 2012, 2:55am

by mrfixit

Do you see your valve on this PAGE < click on that.

Which one is it?

Wednesday, May 16th 2012, 2:06am

by Gerryw (Guest)

sprinklers not popping up

The sprinklers in my yard are not all popping up and the one's that do have low pressure. I replaced the valves about 6 months ago (Lawn genie anti-syphon type). Interestingly, when I open up the bleed screw, they all pop up and the pressure is good. What do you recommend?