You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2230 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, May 10th 2012, 10:26am

by Wet_Boots

The obvious check is an electrical one, using a multimeter. You may read a short circuit in a zone, from a failed solenoid. You may read an open circuit, from a cut wire or a failed rain detector.

Thursday, May 10th 2012, 10:18am

by odiaz1

Rainbird esp6si not turning ON sprinklers

Hi, I need some help here.

I have a Rainbird esp6si controller that is not turning ON the sprinklers. The controller shows all of the settings but nothing happens. I do see that the power adaptor is cracked. Would this could have burnt the IC's in the controller? Please suggest any other checks or solutions. Thanks!