You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2656 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, June 7th 2007, 7:35am

by HooKooDooKu

MPRotators. The MP2000 is designed to have a throw of about 20' @ 30PSI.

Wednesday, June 6th 2007, 8:58pm

by burley

large sprays = bad?

I have a lawn that has an ideal head spacing of about 18-19 feet. This is right at (or just past) the upper limit of most sprays. I've notice that many manufacturers either stop at 15' or only include 17' as a part circle. Is there a reason for this? Are large sprays (17'+) just not a good idea?

If I cover the same area with smaller (10-12') sprays then I'll have twice the heads (14 vs 7) and about 25% more gpm, just enough to put me into two zones instead of one. And having heads in the middle of the turf isn't as nice as having them just around the edges.

If large sprays are okay, what's a good nozzle choice? The Hunter 17 is rated to 19' at 40psi, but the recommended use is 30psi. I was also thinking of using the Institutional Spray bodies which are regulated to 30psi. Irritrol seems to top out at 17 even at 50 psi. Rain Bird rates 18' at 30psi but doesn't spec any higher. Weathermatic brass nozzles allow up to 24' spacing (the throw is actually less, but better uniformity supposedly eliminates need for head-to-head coverage). But I need one head to be 60 degrees, so I might be out of luck on that the brass heads anyway. Any recommendations?