You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 897 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, May 7th 2012, 1:22pm

by Wet_Boots

If the valve will never see freezing temperatures, a ball valve is fine. The old-style brass valves are an upgrade in reliability.

Monday, May 7th 2012, 12:48pm

by jbabq

Emergency shutoff valve questions

Hi all -- I'm replacing some class 200 PVC in an existing system that's getting brittle and starting to fail in places. In doing this, I need to replace the emergency shutoff which is a basic gate valve that has corroded open. This valve comes off a T in the main copper water line and then has a short stub piece that transitions to the PVC.

I was thinking I would just stub off the T in main line and transition to PVC, then install a PVC ball valve. My local sprinker shop advised against this as the ball valve traps water and is thus subject to freezing. Instead, they recommended a valve like this:

http://www.sprinklerwarehouse.com/Aqualine-Manual-Straight-Valve-p/sv-075.htm

That valve seems to be used for pressure reduction (which I don't need) instead of just a simple shut-off. The valve lives in a crawlspace under the house so I'm not hugely worried about freezing... but I want to do this right so I'm open to any suggestions.

Thanks!
Jody in ABQ