You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 906 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Sunday, May 6th 2012, 2:39pm

by scruffy57

Thanks for all your all's help. I found a broken wire and repaired it. I didn't know that would keep me from opening a valve manually though. Sprinkler system runs fine now.

Sunday, May 6th 2012, 1:27pm

by mrfixit

Look at the controller and see if there's a wire hooked up to the mv or pump or p terminal. Those are all the same terminal. Different controllers have different markings for it.

Sunday, May 6th 2012, 11:39am

by Wet_Boots

upload photos at Imageshack and post the thumbnail codes here. As for the shutoff, you may not even have one for the sprinkler system.

Sunday, May 6th 2012, 11:24am

by scruffy57

still trying to find sprinkler shut off

I did some digging and took some pics.
Any ideas?
scruffy57 has attached the following files:

Sunday, May 6th 2012, 10:09am

by Wet_Boots

A single atmospheric vacuum breaker upstream of the zone valves is a code violation today and thirty years ago. Make it a Pressure Vacuum Breaker, and you got real protection, and code compliance.

Sunday, May 6th 2012, 10:01am

by scruffy57

Are you saying I need to upgrade the vacuum breaker?

Could there be another one wherever I find the sprinkler shutoff?

Sunday, May 6th 2012, 9:49am

by Wet_Boots

Absolutely a code violation in Texas, or anywhere, for that matter - they are beginning to pay attention to these things - you may have difficulties selling that house

Sunday, May 6th 2012, 9:34am

by scruffy57

I am not sure if I have a master valve. Is there an easy way to find this out?
es
The sprinkler system is original with the house. Home was built in 1995. There are 6 zones. t I live in Texas and don't have a basement.

I am fixing to go back outside and search for the sprinkler shutoff. Again

Thanks for all the help

Sunday, May 6th 2012, 9:10am

by Wet_Boots

unless you have a one-zone system with that zone valve in your basement, your plumbing is a code violation, and absolutely of no protection to the drinking water

Sunday, May 6th 2012, 2:12am

by mrfixit

Is there a master valve or pump?