You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2237 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Sunday, May 6th 2012, 7:09am

by wsommariva

You may have a master valve - it controlls all other valves. Look at the controller and see if you have wires connected to a MV.

Saturday, May 5th 2012, 5:05pm

by MrsFlipFlops

Okay, here's the update

I went to Rain Bird's website and they mentioned turning the bleed screw to clear out any debris. In my front yard there are three valve boxes, one to the flowerbed- opened bleed screw, sprinkler worked. The other two seem connected to each other some how. If one is off then the other one doesn't turn on, if I turn one on, I can turn it off using the other one. It's very weird. Why would these two be connected somehow? Also, it appears they will only work if the bleed screw is up on one.

The prior owner has six zones listed, I can't find valve boxes for either side of the house, just the front and the flowerbed. This is so new to me.

Saturday, May 5th 2012, 4:34pm

by Central Irrigation

Your hand makes a nice small shovel.

Saturday, May 5th 2012, 4:23pm

by MrsFlipFlops

I just went to go check the diaphragm, but it looks like my valve is stuck in dirt. What's the best way to clean it out? Can I vacuum up the dirt? It's up to the bonnet, so I can't even unscrew or anything. Looks like that's the case with all my valves. The round valve box has a lid, with a little hole for lifting it up.

Saturday, May 5th 2012, 2:47pm

by mrfixit

Sometimes when a diaphragm breaks apart, you'll hear what sounds like water running but it's not.

There's either a break in the pipe somewhere or a bad diaphragm. You might want to turn the water supply off and take the top of the valve off. Inspect the diaphragm. See if it's still in one piece. If it's ok look for a break in the line.

I suppose if you have poly pipe it might be pinched off somewhere.

Saturday, May 5th 2012, 2:13pm

by MrsFlipFlops

Turning Valve manually, hear gush, no water

Hello all- I've been trying to figure out why our sprinklers aren't working. The controller runs through the settings like it's working, but no water. I went to each valve and turned them on manually- on one I turned and nothing happened, but on the others, I turned, I heard a gush of water, but nothing sprang up. What's my next move here?