You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2237 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, May 5th 2012, 7:36am

by Central Irrigation

Correct. The other valve wire will connect to a different color and will end at that valve.

Friday, May 4th 2012, 7:22pm

by louis13

how to wire valves in multiple valve boxes

I am installing my system myself and ran my wire along my main and into each valve box. My question is, should I strip a section of the outer jacket off in each box a cut the white wire in each box which is my common? Do I then twist the 2 pieces of my white wire together along with 1 of the 2 valve wires after I strip them back?