You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2242 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Friday, May 4th 2012, 9:24pm

by martipe1 (Guest)

Thank you

Friday, May 4th 2012, 7:11am

by Wet_Boots

A simple relay (24VAC coil with SPDT contacts) could be wired into the system

Thursday, May 3rd 2012, 10:41pm

by martipe1 (Guest)

Thank you for your answer.

Why? any workaround?


Thursday, May 3rd 2012, 8:49pm

by Wet_Boots

You may not be able to run both a zone valve and a pump relay from the output of that controller.

Thursday, May 3rd 2012, 7:17pm

by martipe1 (Guest)

Start a pump for one zone only

I have a rain bird stp plus controllers, I have set up 2 zones, one for sprinklers and another one for dripping. I would like to know if it is possible to start the pump only for the sprinklers zone, probably connecting the pump relay to the sprinklers zone instead of the master valve connector.
Thanks for your help