You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2241 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, April 30th 2012, 6:40pm

by mrfixit

While the station is running. Open the bleeder screw. Did the pressure increase? If so change the diaphragm.
There might be a break in the line somewhere.
Is the flow control on the valve turned down too low?

Monday, April 30th 2012, 3:52pm

by ap107

Low pressure in one of my zones

I noticed that the zone in my front yard is lacking some pressure because I can take my foot and press down on the rotating heads and they will go down inside the cylinder. My backyard zones appear to have plenty of pressure. Not sure where to start looking. Could it be the control valve maybe is partially open or has something in it to prevent the pressure from fully building up? Kind of puzzled. Any suggestions would be greatly appreciated.