You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2392 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, April 28th 2012, 4:37pm

by Central Irrigation

Unscrew the radius adjustment screw until it clears the clears the nozzle. Use a sheet rock screw and thread it into the nozzle hole and pull it out. It will damage the nozzle, so if you plan on reusing it, this won't work. The other option is to turn the zone on and undo the screw. If you have enough pressure, the nozzle will shoot out. Keep an eye out for where it goes!

Saturday, April 28th 2012, 1:44pm

by mikes (Guest)

toro 800 nozzle

What is the best method for removing the nozzle from the Toro 800?