You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 872 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, April 26th 2012, 2:05pm

by MrGrumpy

Thx

Thursday, April 26th 2012, 1:46pm

by Wet_Boots

Do it right and don't dink around - those figure-8 dealies are for drip tubing only

Thursday, April 26th 2012, 1:24pm

by MrGrumpy

Removing a sprinkler head and capping off.

I need remove a couple of spray heads from a zone. Is it safe to use those hose end ("figure 8" ) jobs to clamp off the swing pipe or do I need to dig all the way to the lateral line and screw in a plug there?