You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2592 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Monday, April 16th 2012, 4:00pm

by mrfixit

You may not have a fuse. It's just a warning. If you do have a fuse then you'll need to replace it.
Reset the controller. Just unplug it. Take out the back up battery. Run the stations until you see which numbered station causes the "fuse" warning.
Find that valve and disconnect one of the wires from the solenoid. Now run the controller again. If there's no warning change the solenoid as Boots suggested. If not it's a wiring issue.

Monday, April 16th 2012, 8:20am

by GatorGuy

Can you give us a make/model of the controller?

Monday, April 16th 2012, 4:26am

by Wet_Boots

Look for a bad (short-circuited) solenoid

Sunday, April 15th 2012, 9:02pm

by oldcarman

24 Zone controller Reading " FUSE" ??

My controller (Irrotrol) is not working at present. It just flashes "FUSE" As I did not find a fuse under the inspection panel, what Fuse would I replace, repair or ????