You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 728 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Tuesday, April 17th 2012, 8:07am

by GatorGuy

Only thing you can do.
Turn fixed side until it is good and then adjust the other side.

Tuesday, April 17th 2012, 5:56am

by wrigley

Rotate the entire head counter-clockwise on its fitting. You will need to readjust the right-stop if you adjust the left-stop.Head Adjustment

So just grab the shaft and physically turn it to the left then re-adjust the right stop with the set screw adjustment?



Mike

Monday, April 16th 2012, 4:36pm

by Central Irrigation

Rotate the entire head counter-clockwise on its fitting. You will need to readjust the right-stop if you adjust the left-stop.Head Adjustment

Monday, April 16th 2012, 7:49am

by Wet_Boots

No, it can't.

Monday, April 16th 2012, 7:23am

by wrigley

Rainbird 42SA rotor

Hello,



Once the fixed left edge of this rotor sprinkler is set, can it be adjusted to move more to the left?



Mike