You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2261 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, April 12th 2012, 6:16pm

by wsommariva

That is what I did. Thanks

Wednesday, April 11th 2012, 3:23pm

by hi.todd

If I read it right you have it backwards.

Yes they are flush nozzles.

Install the heads, Activate the valve for a couple of minutes, This will clean the debris and junk out of the pipe and heads.

Now take off the flush caps or flush nozzles and install the MP Rotators.



Wednesday, April 11th 2012, 9:16am

by wsommariva

Hunter Pro spray bodies pop ups

Hi everyone.

Tomorrow I install 9 MP Rotators in pro spray pop ups. These pop ups come with a device on top. I think it's a flush nozzle? Am I correct? If so I can install these pop ups before I flush the lines of installation dirt?