You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 405 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, April 9th 2012, 8:09am

by GatorGuy

I'm a little confused my self.
Anything downstream of the control valve should be fair game.
Rough piping terminology : main to zone valves, lateral after valves.
So you would still be on a lateral, correct?

Monday, April 9th 2012, 7:56am

by wsommariva

What do you mean by supply line? All heads need to be installed after a valve, no?

Sunday, April 8th 2012, 2:16pm

by LordD

Toro Precision Chip Sprinklers and Design Question

Using Schedule 40, Source is 40PSI I am using...

[align=-webkit-auto]15-H 90, 15' X 2 = 0.58 X 2 = 1.16GPM
10-F 360 10' X 1 = 1.04 X 1 = 1.04 GPM
10-H 180 10' x 1 = 0.52 X 1 = 0.52 GPM
15-H 180 15' x 2 = 1.17 x 2 = 2.34GPM
TOTAL 6.06GPM[/align]


Total 6 Sprinklers

This circuit which is L shaped, on the bottom leg of the L, I wish to place the 1 10' 360 degree Toro Precision sprinkler listed above, on the Supply Pipe.

The design shapes I have seen show that you ought not to put sprinklers on supply llines.

Granted this is only 1 Sprinkler right on the Supply line, Max Supply for Schedule 40 is 8GPM.

Will this not work at all? What do you think? This is just a residential front lawn.