You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 842 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Saturday, April 7th 2012, 9:41am

by Wet_Boots

The workaround is to assign the current zone four to another currently unused zone.

Also, for the sake of building the knowledge base, time this hang-up period for a few controller cycles.

Saturday, April 7th 2012, 4:01am

by mrfixit

Open it up and look at the number 4 dial from the inside. See if it's bent or loose.

Friday, April 6th 2012, 11:17pm

by Wet_Boots

dirty/worn/corroded wafer switch contacts

Friday, April 6th 2012, 6:57pm

by daltex

Imperial, Valet timer problem

I have a 6 station Imperial Valet timer that periodically hangs up at station 4. I manually recycle the timer to station 4 and then it turns on. What is causing this problem. Thanks for your help.
Daltex