You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2280 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, March 20th 2012, 9:07pm

by hi.todd

I know this sounds lame, but is there a bypass switch for the rain sensor?

May be it accidentally was in the bypass mode.

I am sure it is something else though.


Thursday, March 15th 2012, 7:40pm

by ros

Rainbird ESPM Controller and Hunter Mini-Clik Sensor Question

I recently installed a Rainbird ESPM controller and a Hunter Mini-Clik rain
sensor wired to the two SEN terminals. Worked like it should when tested by
suppressing the plunger on the top of the rain sensor.

Yesterday I
installed the same set up at another customer. When tested, the watering would
not suspend. I tried another new Mini-Clik and another new ESPM and it still
would not work. Finally I had to just break the common through the Mini-Clik
(the old way) to get it to work.

Any thoughts on why it worked correctly
one time and not the second time?

Thanks / Regards,