You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2309 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, February 26th 2012, 11:32pm

by Mitchgo

How many zones do you have?

The wiring leading into the old controller would be the old wiring to hook into the new controller. Is it a single plug with a bunch of wires? If it is you will have to cut off that plug and use each individual wire

Sunday, February 26th 2012, 4:54pm

by tanstan


I just bought a new Orbit 6 station controller. The issue is I had the old mechanical timer with push pins for ea zone and I only have 2 red wires coming from my valve. I dont have wires for ea zone. How do I connect?