You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2313 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, February 16th 2012, 8:25am

by wsommariva

Very good - that is much better. Thank you

Wednesday, February 15th 2012, 3:51pm

by mrfixit

Yes no problem. You could also cut one of the common solenoid wires in half and splice it there instead of using the brown wire.

Wednesday, February 15th 2012, 2:25pm

by wsommariva

Two common wires to a controller?

Hi everyone.

I need to add a valve to a manifold. Instead of uncapping my current common wire bundle, can I use an unused wire, say brown, at the valve and at the controller attach this brown to the common screw? I'd like to avoid a greasy mess.