You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4381 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, October 27th 2002, 2:51pm

by RVLI

Then you should go with city code. Install it as close as you can to the main valve.
Hope this helps,


Sunday, October 27th 2002, 2:45pm

by Troy

here in Wyoming the city code of most citys is that a double-check
valve is used so that city or county can tie in to see if it is working properly and loacation is next or close to main water turn-on



Thursday, October 24th 2002, 1:20pm

by RVLI

I always install a PVB outside right from the point it comes out of the house. It is easier to install, winterize, and maintain. Take caution though, when it freezes, make sure you put a blanket or towel on it to keep it from freezing.


Thursday, October 24th 2002, 2:43am

by rossi7

Placement of Backflow preventer

Had two seperate proposals on residential irrigation systems. One recommended placing the backflow preventer under my house crawl space. (ease of winterizing and freeze up prevention). The other of course recommended outside installation. (Preventative measure in case of backflow, as well as ease of maintenance). Which is the proper way..or are the advantages.

Matt

Matthew Rossi