You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2714 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 8 posts

Tuesday, April 17th 2007, 5:38pm

by BenC

Thanks to those responding to my post. After scouring the country and finding a couple of sources, turns out the clock motor was available locally, and at a lesser cost even after adding in sales tax! My troubleshooting was correct, and now I have a nice working controller. Now on to find seat washers and diaphragms for my Imperial-Crown valves, which my local source is out of.

Thursday, April 12th 2007, 3:07am

by Wet_Boots

But Imperial Valets are just way cool, and about as bulletproof a controller as ever existed. The down side only comes much later, when the cost of all the replacement motors you might need get added up.

Wednesday, April 11th 2007, 5:35pm

by Tom

OR, its time to join the 21st century

Wednesday, April 11th 2007, 1:46pm

by Wet_Boots

All those motors should continue to be available from several sources, who can decipher what you have, if you can give them the name and numbering from the original motor.

Wednesday, April 11th 2007, 9:29am

by SprinklerGuy

If you need a timing motor...I bet I could get you one...that may or may not fix it however.

If you want to send the timer to me to be gone through, we can do that as well....


sprinklersolutions@msn.com


Wednesday, April 11th 2007, 8:07am

by BenC

Thanks for the reply. I'd like to keep my Imperial timer, though, and that's why I am trying to find a source for a clock motor.

Wednesday, April 11th 2007, 4:48am

by Wet_Boots

Google is your friend ~ and unless you have an old system with high-current Imperial solenoid valves, you might buy a new controller for less than the motor would cost you.

Tuesday, April 10th 2007, 6:32pm

by BenC

Imperial Valet clock motor

I have a 6-station Imperial Valet timer with a weak clock motor. It runs until it gets to the point of moving the cam or gear to flip to the next day, at which point it stalls out. I've cleaned and lubricated all the mechanical parts in the timer with no improvement, and so conclude that the motor is weak or the internal gears in the motor housing are crudded up (I decided not to try to pull the sealed clock motor case apart to get to the gears). Does anyone know of a source for a new clock motor? I cannot find a model number on the unit -- only the name "Imperial Valet." Thanks for any information.