You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2589 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, March 21st 2007, 11:31pm

by mrfixit

Take the bonnet off the valve. Something's keeping the valve from doing it's job. I've seen the older 205's metering pin rust keeping the diaphragm from opening or closing. I suggest having a diaphragm on hand. Perhaps just buy the whole valve for parts. They're fairly inexpensive. Good luck!

Tuesday, March 20th 2007, 2:24pm

by s1corbin

irritrol 205 series valves

I am having trouble with one zone and low pressure in my system. I have one valve that is stuck open and will not shut off. Ihave replaced the solenoid with no help.The second problem is the whole system loses pressure when only one zone is on. When the zone stuck open is manually shut off the system loses all pressure.