You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1170 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, October 5th 2011, 1:46pm

by Mitchgo

Replace it or gut swap the internal and top portion of the valve

Wednesday, October 5th 2011, 1:35pm

by Wet_Boots

Find the valve. Identify the valve. Fix the valve.

Wednesday, October 5th 2011, 7:20am

by Vegasvictim (Guest)

Manual Valve- delay when turned on, will not turn off

After reviewing a number of posts, I do not see the same issue that I have so...

A Signal is going to the valve, so I decided to turn it manually. All other valves working as designed and there has been no recent work on the system.

I turn the manual valve on (no idea what brand) after about 90 seconds the sprinklers come on and spray with an appropriate volume. when I turn the valve off the water continues until I go to the cut off valve and stop all water from my system. When I turn the water to the system back ON and the questionable valve is in the off position it remains off and there is no water flow.

I would assume that this is a valve issue. Any help is appreciated.